How to Install Rain Shower Set?

If you want to add a touch of luxury to your bathroom, the Rainshower Shower Set is just the thing for a soothing and pampering shower experience. Here is a step-by-step guide on how to install a Rainshower shower set in your bathroom.

Step 1: Gather Materials Before starting, make sure you have all the materials you need. You typically need the following:

- rain shower head

- extension arm or Shower Arm

- Teflon tape- adjustable wrench

- screwdriver

- Silicone caulk

Step Two: Turn Off the Water Supply

Turn off the water supply in the shower or bathroom. This is usually done with a valve or lever located near the water main or in the bathroom.

Step Three: Remove the Old Shower Head

Use an adjustable wrench to remove the old shower head. Make sure to wrap the wrench jaws with a soft cloth to avoid damaging the shower arm. If the old shower head is stuck, try using a pair of pliers to help loosen it.

Step Four: Install the Extension Arm or Shower Arm

If your new rain shower head requires an extension arm or shower arm, use Teflon tape to tighten it to ensure a tight seal. If you're just replacing an existing shower head, skip this step.

Step 5: Connect the shower head

Attach the rain shower head to the extension arm or shower arm. Make sure to use Teflon tape to create a tight seal and lightly tighten with an adjustable wrench.

Step Six: Apply Silicone Caulk

Apply a small amount of silicone caulk around the base of the extension arm or shower arm to help create a watertight seal.

Step Seven: Turn the Water Supply Back On

Turn the water supply back on and test the new rain shower head to make sure there are no leaks.

With these simple steps, you can install a rain shower set in your bathroom and enjoy a luxuriously relaxing shower every time.